- Advanced engineering
- Low operating cost
- Transportable with rollerbase design
- Easy to operate and maintain
- Time-proven reliability
- Thousands in use around the world
How does the PSA system work?21 % oxygen, 78% nitrogen, 0.9% argon, and 0.1% other gases. The Oxy-Spritz Oxygen Generator separates oxygen from compressed air through a unique Pressure Swing Adsorption (PSA) process. The PSA process uses molecular sieve (a synthetic zeolite), with attracts (adsorbs) nitrogen from air at high pressure and releases (desorbs) it at a low pressure.
The Oxy-Spritz Oxygen Generator uses two vessels filled with molecular sieve as adsorbers. As compressed feed air flows through one of the vessels, the molecular sieve adsorbs nitrogen. The remaining oxygen passes through the vessel and exits as the product gas. Before the adsorber be comes saturated with nitrogen, the feed air is diverted to the second vessel. At that point, the sieve in the first vessel regenerates by desorbing the nitrogen through depressurization and purging it with oxygen from the second vessel.
This process is then repeated in the second vessel to complete a cycle that allows the oxygen generator to deliver a constant flow of product oxygen at 90% minimum purity. Under normal operating conditions, the molecular sieve is completely regenerative and will last indefinitely.
Specifications- Operating Characteristics
- Product Flow: 6 LPM/0.31 Nm3/hr
- Standard Product Pressure: 9 psig/62 kPa
- Product Purity: 93% ± 3%
- Product Dew Point: -100°F (-73°C)
- Sound Level: 49 dB
- Power Requirements
- 100V~±10%, 50/60Hz, Single Phase, 5.5A
- 120V~±10%, 60Hz, Single Phase, 5.0A
- 220V~±10%, 50 or 60Hz, Single Phase, 2.5A
- Typical Power Consumption: 350 W
- Certifications & Approvals
- Dimensions
- 15.7" x 14.5" x 28.5"
- Weight: 54lbs.
